Rosemount 848T Specifikace Strana 54
- Strana / 136
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
46
Reference Manual
00809-0100-4697, Rev GA
Section 3: Configuration
November 2014
Configuration
Changing the sensor configuration in the transducer block
If the FOUNDATION fieldbus configuration tool or host system does not support the use of DD
methods for device configuration, the following steps illustrate how to change the sensor
configuration in the transducer block:
1. Set the MODE_BLK.TARGET to OOS, or set the SENSOR_MODE to configuration.
2. Set SENSOR_n_CONFIG.SENSOR to the appropriate sensor type, and then set
SENSOR_n_CONFIG.CONNECTION to the appropriate type and connection.
3. In the Transducer Block, set MODE_BLK.TARGET to AUTO, or set the SENSOR_MODE to
operation.
49 VALIDATION_SNSR3_CONFIG Validation configuration parameters. See tables below
for a list of sub-parameters that pertain to Validation
Configuration functions.
50 VALIDATION_SNSR3_VALUES Validation value parameters. See tables below for a list
of sub-parameters that pertain to Validation values.
51 VALIDATION_SNSR4_CONFIG Validation configuration parameters. See tables below
for a list of sub-parameters that pertain to Validation
Configuration functions.
52 VALIDATION_SNSR4_VALUES Validation value parameters. See tables below for a list
of sub-parameters that pertain to Validation values.
53 VALIDATION_SNSR5_CONFIG Validation configuration parameters. See tables below
for a list of sub-parameters that pertain to Validation
Configuration functions.
54 VALIDATION_SNSR5_VALUES Validation value parameters. See tables below for a list
of sub-parameters that pertain to Validation values.
55 VALIDATION_SNSR6_CONFIG Validation configuration parameters. See tables below
for a list of sub-parameters that pertain to Validation
Configuration functions.
56 VALIDATION_SNSR6_VALUES Validation value parameters. See tables below for a list
of sub-parameters that pertain to Validation values.
57 VALIDATION_SNSR7_CONFIG Validation configuration parameters. See tables below
for a list of sub-parameters that pertain to Validation
Configuration functions.
58 VALIDATION_SNSR7_VALUES Validation value parameters. See tables below for a list
of sub-parameters that pertain to Validation values.
59 VALIDATION_SNSR8_CONFIG Validation configuration parameters. See tables below
for a list of sub-parameters that pertain to Validation
Configuration functions.
60 VALIDATION_SNSR8_VALUES Validation value parameters. See tables below for a list
of sub-parameters that pertain to Validation values.
61 SENSOR_GRAPH_LIMIT Sensor graph limit parameters
62 DIFFERENTIAL_GRAPH_LIMIT Differential graph limit parameters
Table 3-15. Transducer Block Parameters
Number Parameter Description
- Transmitter with FOUNDATION 1
- fieldbus 1
- Transmitter with F 3
- Title Page 4
- 1Section 1: Introduction 5
- 2Section 2: Installation 5
- 3Section 3: Configuration 5
- AAppendix A: Reference Data 6
- DAppendix D: Function Blocks 8
- Section 1 Introduction 9
- 00809-0100-4697, Rev GA 10
- November 2014 10
- OUNDATION fieldbus Technology 10
- 1.3 Service support 11
- Section 1: Introduction 12
- Introduction 12
- Section 2 Installation 13
- 2-in. screws 14
- 2.3 Wiring 16
- RTD or ohm inputs 17
- Analog inputs 17
- 2.4 Grounding 19
- Shielded wire 20
- Grounded thermocouple inputs 21
- Analog device inputs 21
- 2.5 Switches 22
- 2.6 Tagging 22
- Transmitter tag 23
- Sensor tag 23
- 2.7 Installation 24
- 2.7.2 Using conduit entries 25
- Section 2: Installation 26
- Section 3 Configuration 27
- 3.2 Configuration 28
- 3.2.5 Alarms 29
- 3.2.6 Damping 29
- Typical profiling application 31
- OUNDATION fieldbus 33
- Section 3: Configuration 34
- Number Parameter Description 34
- OUNDATION 35
- How to use PlantWeb Alarm 39
- 3.4.3 PlantWeb alerts 40
- MAINT_ALARMS 41
- Advisory alarms 42
- RECOMMENDED_ACTION 43
- FD failed alarms 44
- Configuration 45
- FD CHECK ALARMS 47
- 3.4.7 Transducer blocks 49
- Transducer block errors 50
- Transducer block modes 50
- Automatic (Auto) 51
- Out of Service (OOS) 51
- 4.4.2 Resource block 64
- Appendix A Reference Data 65
- OUNDATION fieldbus parameters 66
- A.3 Function blocks 67
- A.4.1 Stability 68
- A.4.2 Self calibration 68
- A.4.3 Vibration effect 68
- A.4.5 Accuracy 68
- A.4.8 Analog sensors 4–20mA 69
- Reference Data 70
- Examples 71
- A.5 Dimensional drawings 72
- A.5.1 Mounting options 74
- A.6 Ordering information 75
- Approvals 77
- B.3.2 Canada 78
- B.4 Europe 79
- B.5 International 81
- B.5.1 Brazil 83
- B.5.2 China 84
- B.5.3 Japan 86
- B.6 Combinations 87
- B.8 Additional Certifications 88
- B.10 Installation drawings 90
- Product Certificates 91
- Appendix C FOUNDATION 99
- Technology 99
- C.3 Device descriptions 100
- C.4 Block operation 101
- C.5 Network communication 101
- C.5.1 LAS 102
- C.5.2 Addressing 103
- C.5.3 Scheduled transfers 104
- C.5.4 Unscheduled transfers 105
- OUNDATION Fieldbus Technology 106
- Appendix D Function Blocks 107
- Reference Manual 108
- Appendix D: Function Blocks 108
- Table 3-5 on page 11 108
- D.1.1 Functionality 110
- Filtering 111
- Signal conversion 111
- Indirect 111
- Indirect square root 112
- Block errors 112
- Alarm detection 113
- Status handling 114
- Advanced features 114
- Application information 114
- D.2.1 Functionality 118
- D.3.1 Functionality 125
- Block execution 127
- AVG_USE = 6 129
- Numerics 131
Související produkty a manuály pro Měření, testování a kontrola Rosemount 848T
(36 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.033 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce