Rosemount Smart Wireless Gateway Specifikace stáhnout pdf (Strana 23)

Reference Manual

00809-0200-4420, Rev HB

Section 3: Mounting and Connection

January 2015

Mounting and Connection

3.2.1 Pipe mount

The following hardware and tools are needed to mount the Gateway to a 2-in. pipe:

 Two

/16-in. u-bolts (supplied with Gateway)

 2-in. mounting pipe

 ½-in. socket-head wrench

Mount the Gateway using the following procedure:

1. Insert one u-bolt around the pipe, through the top mounting holes of the Gateway

enclosure, and through the washer plate.

2. Use a

/2-in. socket-head wrench to fasten the nuts to the u-bolt.

3. Repeat for the second u-bolt and the lower mounting holes.

Figure 3-2. Pipe Mount

3.2.2 Bracket mount (alternate)

The following hardware and tools are needed to mount the Gateway to a support bracket:

 Four

/16-in. bolts

 Mounting support bracket



/8-in. drill



/2 -in. socket-head wrench

Mount the Gateway using the following procedure:

1. Drill four

/8-in. (9,525 mm) holes spaced 3.06-in. (77 mm) apart horizontally and

11.15-in. (283 mm) apart vertically in the support bracket, corresponding with the

holes on the Gateway enclosure.

2. Using a

/2-in. socket-head wrench, attach the Gateway to the support bracket with four

/16-in. bolts.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 85 86

Žádné komentáře

Rosemount Smart Wireless Gateway Specifikace Strana 23